4065 Frank Aluminium Sliding Door
Slim Frame Sliding Glass Door for Bright Living Spaces
The 4065 Frank aluminium sliding door combines smooth sliding operation, generous glazing and a refined frame design. This custom aluminium sliding glass door is suitable for living room and balcony connections, interior partitions and selected patio applications. Choose a two track or three track sliding door layout to suit the opening.
Aluminium Sliding Door Features and Specifications
Smooth sliding operation
The rolling system supports comfortable everyday operation of the aluminium sliding door. Level tracks and correctly selected rollers must suit the weight of each glass panel.
Slim frame and clear views
The slim frame sliding glass door uses listed sash dimensions of 40 mm side depth and 65 mm face width. Visible sightlines vary with the stile configuration; confirm the final drawings.
Space saving opening
Sliding and fixed glass panels connect living spaces without swing clearance. The clear opening depends on panel count and the two track or three track layout.
|
Opening
|
Sliding plus fixed panels
|
|
Aluminium
|
6063A T5; sheet cites GB/T 8478 2020
|
|
Wall thickness
|
Frame 2.0 mm; sash 3.0 mm
|
|
Track width
|
103-65 two track: 103 mm; 154-65 three track: 154 mm
|
|
Track height
|
Raised track: 45 mm indoors, 35 mm outdoors. Standard low track: 8 mm
|
|
Glazing
|
Taiwan Glass float glass; 5+20Ar+5 or 6+18Ar+6; black embossed aluminium spacer
|
|
Hardware and seals
|
Moor hardware, standard black finish; automotive grade EPDM gaskets
|
|
Joints
|
Profile end adhesive and joint waterproof pads; standard separating strips listed
|
Sliding Glass Door Performance and Profile Section
Supplier performance specifications
|
Thermal performance
|
U ≤ 2.13 W/(m²·K); Grade 6
|
|
Wind resistance
|
≥ 4.5 kPa; Grade 8
|
|
Air permeability
|
0.75 m³/(m·h); Grade 8
|
|
Watertightness
|
680 Pa; Grade 5
|
|
Sound insulation
|
40 dB; Grade 4
|
These aluminium sliding glass door values and grades are transcribed from the supplier sheet. Door size, glass, track and installation affect performance. Verify the test report for the selected configuration before project acceptance.
The supplier profile photograph shows the frame, sash, track and glass assembly. Final profile geometry and fabrication dimensions must follow approved CAD drawings.
Slim Frame Aluminium Sliding Door Applications
Balcony doors and interior glass partitions
Use the 4065 Frank aluminium sliding door to connect a living room and balcony or create a glazed interior partition. For aluminium patio door applications exposed to weather, confirm drainage, sealing and installation requirements. The staged visual illustrates appearance; approved samples define the final finish and details.
Custom Aluminium Sliding Door Options
|
Finishes
|
Grey, black gold and dark coffee listed for both sides; Austrian TIGER powder listed. Confirm with a sample.
|
|
Glazing
|
5+20Ar+5 and 6+18Ar+6 listed. Confirm tempered, Low E, laminated or special glass separately.
|
|
Track options
|
Standard 8 mm low track. Raised or low drainage track with floor drain is an extra cost option.
|
|
Lock options
|
Double hook key lock or integrated Moor double hook lock are extra cost options. Confirm the exact model.
|
|
Trims
|
70 mm trim with single or double sided wrapping; listed ranges 195 mm for two track and 250 mm for three track. Extra width quoted separately.
|
|
Size and quotation
|
Custom opening dimensions and panels. Sheet lists a minimum billed area of 1.6 m² per sash; final quotation governs.
|
Ordering a custom sliding glass door
1. Measure opening width, height and finished wall thickness at several points.
2. Confirm interior and exterior sides, panels, slide direction, fixed panels and clear opening.
3. Choose two or three tracks, low or raised track, drainage and finished floor level.
4. Approve glazing, colour sample, lock, trims and any extras.
5. Confirm delivery, packaging, installation and lead time. Approve production drawings.
Request your 4065 Frank aluminium sliding door configuration from Shenghao Doors. Provide dimensions, panel layout, glazing, finish and hardware requirements for a project quotation.
shenghaodoors.com | WhatsApp +86 13924671020
