60
minutes / 1 hour
Approx. 25 mm
Composite insulating fire glass for tested EI applications; configuration and tolerance by report.
Fire-resistant glazing · Factory direct
Fire-Rated Glass Engineered for the Whole System.
Monolithic, composite insulating, fire-rated IGU and laminated glass solutions from 60 to 180 minutes—matched to the tested frame, size and installation.
60 / 90 / 120 / 180 MinE · EW · EI Classes6–12 mm MonolithicCustom Shapes
Core fire-resistance range
Select by Fire Duration & Required Classification
The following thicknesses are the proposed factory series supplied for project selection. Every order must be matched to the applicable test report, classification, maximum tested size, supporting frame and installation detail.
E — Integrity
Restricts passage of flames and hot gases for the rated period. It does not automatically provide thermal insulation.
EW — Radiation
Provides integrity plus a tested limit on radiant heat. Confirm the specified radiation criterion and glazing system.
EI — Insulation
Provides integrity plus a tested limit on temperature rise on the non-fire side. Normally uses multi-layer fire-resistant constructions.
System rule: “60/90/120/180 minutes” is not a property of thickness alone. The valid rating belongs to the tested glazing assembly—including glass type, dimensions, frame, beads, setting blocks, seals, orientation and installation.
Shop product navigation
Available Glass Product Lines
The names below follow the factory and shop catalogue. They are product-navigation terms, not stand-alone certification claims. The exact construction, fire classification, duration, thickness, maximum size and application must be confirmed against the corresponding product report before quotation or order.
Class C Monolithic Fire-Resistant Glass
Quartz Glass
Composite Liquid-Filled Glass
Class A Fire-Resistant Glass
High-Temperature Glass
Class A Insulating Fire Glass
Class C Non-Insulating Fire Glass
Grouted Fire-Resistant Glass
Composite Insulating Fire Glass
Tempered Fire-Resistant Glass
Tempered Glass
Glass-Ceramic
Nano-Silica Fire-Resistant Glass
Laminated Fire-Resistant Glass
Important: A catalogue category or product photograph does not prove a fire rating. Use only the classification and application supported by the exact test report and complete glazing system.
Actual production details
Actual Product & Edge Construction Details
These photographs show real finished units, glass edges and production-ready glazing. They are presented as manufacturing evidence only and are not used to identify a fire class or rating.
Finished glass units
Edge construction detail
Multilayer edge detail
Sample completed unit
Large-size custom glazing
Production-ready glazing units
Special-shaped capability
Your Drawing Defines the Shape
Send the opening dimensions, glass make-up, edge requirements and intended application. Our team reviews manufacturability before production.
- Rectangle & square
- Triangle & trapezoid
- Arch & semicircle
- Sector & circular
- Multi-sided polygon
- Curved / bent profile
- Holes & notches
- Template-based shape
For non-standard geometry, a 1:1 template or CAD/DXF drawing may be requested before final confirmation.
Technical selection guide
Fire Glass Parameters & Build-Up Options
Use this table for inquiry preparation. The final quotation must name the required standard, classification, duration, orientation and the complete tested glazing system.
Fire classifications
E / integrity · EW / integrity plus radiation control · EI / integrity plus thermal insulation
Rated durations
60 minutes · 90 minutes · 120 minutes · 180 minutes, only where supported by the applicable test/classification report
Monolithic series
Common nominal thicknesses: 6 mm · 8 mm · 10 mm · 12 mm. Classification and maximum size vary by product.
Composite EI series
Proposed selection: 25 mm / 60 min · 30 mm / 90 min · 38 mm / 120 min · 45 mm crystal-silica / 120 min · 65 mm crystal-silica / 180 min
Fire-rated IGU
Fire pane + cavity + outer pane; clear, Low-E, laminated, tinted or decorative outer panes may be evaluated. Fire rating belongs to the tested complete configuration.
Fire laminated glass
Fire-resistant construction combined with safety or acoustic interlayers. Impact class, acoustic value and fire class require separate confirmation.
Visible appearance
Clear · ultra-clear · light grey · bronze · blue · green · frosted · Low-E / reflective. Physical sample approval is recommended.
Processing limits
Cut-outs, holes, notches, bending and irregular shapes only where permitted by the product process and supporting report; no site cutting after manufacture.
Required inquiry data
Standard · E/EW/EI class · minutes · width × height · portrait/landscape · frame system · application · quantity · destination
Typical applications
Fire doors · fire windows · partitions · escape routes · stairwells · atriums · façades · smoke barriers · equipment viewing panels
Specification caution: Do not market ordinary tempered glass, ordinary laminated glass, ceramic glass or an IGU as “fire-rated” unless that exact product and glazing system are covered by a valid report for the required application.
Visual selection
Glass Color & Surface Choices
Choose the appearance first, then confirm it with an actual sample or approved reference. Screen colors vary by display and cannot replace physical sample approval.
Clear
Ultra-clear
Grey
Bronze
Blue
Green
Frosted
Low-E / Reflective
Real production
Factory Capacity You Can See
The photographs below show actual glass racks, custom units, curved pieces and batch production handling. Product labeling and identifiable company marks are intentionally not displayed.
Order workflow
From Drawing to Protected Shipment
01
Technical Review
Drawing, application, dimensions, quantity and destination are checked.
02
Sample Approval
Glass color, coating, spacer, edge and make-up are confirmed as required.
03
Controlled Production
Processing, assembly and identification follow the approved order sheet.
04
Inspection & Packing
Dimensions and appearance are checked before export-ready protection.
Factory & quality documentation
Evidence Supplied to Match the Order
Rather than showing an unrelated logo or making a blanket certification claim, supporting documents are provided according to the selected product, destination and contract.
Business & factory documentsFactory profile, business registration and production information can be supplied for customer review.
Material traceabilityGlass configuration sheets, batch identification and available material records can accompany the order.
Inspection recordsDimension, appearance, edge, spacer and seal inspection records are available according to order requirements.
Certificates & test reportsProduct-specific certificates or third-party test reports are provided only when applicable and confirmed before order.
Replace this section with the factory’s exact certificate names and report numbers only after the original documents have been verified.
Frequently asked questions
Before You Order
Can you produce glass from a hand sketch?
Yes for initial evaluation. A dimensioned CAD/DXF drawing or a full-size template may be required for final approval of complex shapes.
Can different pane thicknesses be combined?
Yes, asymmetric and laminated make-ups may be possible. The structure, safety requirement, coating position and processing limits must be reviewed first.
How is the final color confirmed?
Approve a physical sample or a clearly identified manufacturer reference. Online swatches are visual guidance only.
Do you provide certificates?
Available documents depend on the selected glass, processor, destination and required standard. Confirm the exact certificate or test report before placing the order.
How is special-shaped glass packed?
Units are protected by separators, edge guards and suitable racks or export cases based on geometry, quantity and shipping method.
